How to change bicycle tires?

Big problem for people who ride bicycles, no matter what type of bicycle is to change bicycle tires. Both of the outer and inner tubes, some people who do not have knowledge of this matter may be suspicious and have problems when you have to change your own bicycle tires. Especially in areas where there are no bicycle repair shops. It may be difficult for you.

How to change the bicycle tires.

1. First, start by removing the wheel from the bicycle. Use a wrench to remove it from the bicycle. Both front side and back side.

2. Let the tire air out by loosening the tire rim from the wheel. Keep the air out from the side that opposite to the valve. This is to make the inner tube loosening and make it easy to pry the tires out.

3. For removing the tire, should check and see the inner tube first. Must careful not to let the pry tool hit the inner tube. To prevent the air leakage when use a pry tool, insert and pry it directly on the outer tire and slowly cutting the bead from the opposite side of the valve until the entire tire comes out.

4. For the process of putting the tires on. Find the foreign objects in the tire. Including checking the condition of the wheel inside, make sure that there is nothing stuck. This is to prevent the leakage.

5. For how to change the bicycle tires. Inflate a little air to make it easy to insert it. Then insert the inner tube into the outer tire. Starting from the valve side. To prevent the air leaks, must be careful when insert it. After that, keep the inner tube by pushing it into the wheel rim. By starting from the opposite side of the valve first.

6. When finished to insert the tires, massage the rubber in order to prevent the tires from slipping out and to prevent the rims from overlapping with the inner tubes. After that, fill the air.

7. Bring the wheel back to its original place. Tighten all knots.

For safety drive, after changing bicycle tires. It’s important to check the bike that the tire slips out of the rim or not, check tire pressure. Including make sure that the condition of brake and gear are in normal condition. This is to ensure that all road journeys are properly planned and completely safe.